Home - Products - EMC - Products Info
Electromechanical Cable Product Info

0.36

0.36" (0.91 mm) Monoconductor 1Q36-FO-S75

Properties

Cable Diameter:

0.357" +0.005" -0.002"
(9.07mm +0.13mm -0.05mm)

Minimum Sheave Diameter:

22"
(56 cm)

Cable Stretch Coefficient:

1.25 Kft/Klbs
(1.43 m/Km/5KN)

ELECTRICAL

Maximum Conductor Voltage:

1,500 VDC

Recommended Operating Conductor Voltage:

Conductor AWG Rating:

11

Recommended Operating Conductor Voltage

1,500 MegaΩ/Kft @ 500VDC
(457 MegaΩ/Km @ 500VDC)

Armor Electrical Resistance:

10.4 Ω/Kft
(34.1 Ω/Km)

Mechanical

Minimum Insulation Resistance:

Ends Fixed:

10,200 lbs
(45.4 KN) Nominal

Maximum Suggested Working Tension:

5,100 lbs
(23.4 KN)

Number and Size of Wires:

Inner Armor:
18 x 0.039"
(0.991 mm)
Outer Armor:
23 x 0.039"
(0.991 mm)

Average Wire Breaking Strength:

Inner Armor:
286.7 lbs
(1.28 KN)
Outer Armor:
286.7 lbs
(1.28 KN)
Cable Type Core Description Cable Weight
Temp Rating Plastic Type Insulation Thickness Copper Construction Res Typical Cap Typical O.D. Each In Air In H2O Spec. Gravity
°F
°C		 in
mm		 in
mm		 Ω/Kft
ΩKm		 pf/ft
pf/m		 in
mm		 lbs/Kft
Kg/Km
1Q36YZ-FO-S75 500*°
-18°		 ETFE 0.032
0.800		 14x0.0253
14x0.643		 1.43
4.68		 144
472		 0.208
5.27		 243
361		 201
298

* See attached specification sheet for recommended maximum temperature exposure times.

  • Number, type and temperature rating of fiber optic elements is dependent on customer request.
  • While insulation is rated to 1-hour exposure of 500°F, the fiber optic element in the cable will dictate the maximum operating temperature for the cable.
  • Fiber in metal tube (FIMT): stainless steel OD of 0.094 in. (2.4 mm). Extra fiber length (EFL) is specified by customer request and subject to manufacturing capabilities.
  • Attenuation increase in the fiber optic under loaded conditions may vary.
  • While insulation is rated to 1-hour exposure of 500°F, alloy armor wires may have reduced corrosion resistance at temperatures
  • above 350°F.
  • The armor wires are made of corrosion resistant alloy steel suitable for low level H2S and CO2 environments.
  • Conductor has nickel plated wires adhering to ASTMB355 Class 10 for increased corrosion resistance.
  • All values shown are nominal or typical values.


View Product Specification Sheet

This website uses cookies to ensure you get the best experience on our website. Learn more
OK SETTINGS