Home - Products - EMC - Products Info
Electromechanical Cable Product Info

5/16” (8.18 mm) Monoconductor 1N32-S75 Corrosion Resistant

5/16” (8.18 mm) Monoconductor 1N32-S75 Corrosion Resistant

Properties

Cable Diameter:

0.322” +0.005” – 0.002”
(8.18mm + 0.13mm -0.05mm)

Minimum Sheave Diameter:

18”
(46 cm)

Cable Stretch Coefficient:

1.59 ft/Kft/Klbs
(1.787 m/Km/5KN)

ELECTRICAL

Maximum Conductor Voltage:

1,500 VDC

Recommended Operating Conductor Voltage:

Conductor AWG Rating:

15

Recommended Operating Conductor Voltage

1,500 MegaΩ/Kft @ 1000VDC
(457 MegaΩ/Km @ 1000VDC)

Armor Electrical Resistance:

9.0 Ω/Kft
(29.5 Ω/Km)

Mechanical

Minimum Insulation Resistance:

Ends Fixed:

9,700 lbs
(43.16 KN) Nominal

Maximum Suggested Working Tension:

4,850 lbs
(21.58 KN)

Number and Size of Wires:

Inner Armor:
12 x 0.0445”
(1.130 mm)
Outer Armor:
18 x 0.0445”
(1.130 mm)

Average Wire Breaking Strength:

Inner Armor:
373.4 lbs
(1.66 KN)
Outer Armor:
373.4 lbs
(1.66 KN)
Cable Type Core Description Cable Weight
Temp Rating Plastic Type Insulation Thickness Copper Construction Res Typical Cap Typical O.D. Each In Air In H2O Spec. Gravity
°F
°C		 in
mm		 in
mm		 Ω/Kft
ΩKm		 pf/ft
pf/m		 in
mm		 lbs/Kft
Kg/Km
1N32WTZ–S75 500*°
-18°		 FEP 0.0245
0.622		 19x0.0142
19x0.361		 3.2
10.5		 45
148		 0.120
3.048		 201
299		 166
247		 N/A
1N32WTZ–S75 500*°
-18°		 ETFE 0.0175
0.444		 19x0.0142
19x0.361		 3.2
10.5		 45
148		 0.155
3.937		 201
299		 166
247		 N/A

* See attached specification sheet for recommended maximum temperature exposure times.

  • While insulation is rated to 1-hour exposure of 500°F, alloy armor wires may have reduced corrosion resistance at temperatures above 350°F.
  • The armor wires are made of corrosion resistant alloy steel suitable for low level H2S and CO2 environments.
  • Conductor has nickel plated wires adhering to ASTMB355 Class 10 for increased corrosion resistance. 
  • Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68°F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration. 
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers. 
  • The insulation temperature rating assumes a normal gradient for both temperature and weight. 
  • All values shown are nominal or typical values.


View Product Specification Sheet

This website uses cookies to ensure you get the best experience on our website. Learn more
OK SETTINGS