Home - Products - EMC - Products Info
Electromechanical Cable Product Info

5/16

5/16" (8.18 mm) Monoconductor 1N32-EEHS

Properties

Cable Diameter:

0.322" +0.005" - 0.002"
(8.18 mm +0.13 mm -0.05mm)

Minimum Sheave Diameter:

18"
(46 cm)

Cable Stretch Coefficient:

1.2 ft/Kft/Klbs
(1.35 m/Km/5KN)

ELECTRICAL

Maximum Conductor Voltage:

1,500 VDC

Recommended Operating Conductor Voltage:

Conductor AWG Rating:

15

Recommended Operating Conductor Voltage

1,500 MegaΩ/Kft @ 1,000 VDC
(457 MegaΩ/Km @ 1000VDC)

Armor Electrical Resistance:

2.1 Ω/Kft
(6.9 Ω/Km)

Mechanical

Minimum Insulation Resistance:

Ends Fixed:

14,750
65.63 KN) Nominal

Maximum Suggested Working Tension:

7,375
(32.7 KN)

Number and Size of Wires:

Inner Armor:
12 x 0.0445”
(1.130 mm)
Outer Armor:
18 x 0.0445”
(1.130 mm)

Average Wire Breaking Strength:

Inner Armor:
564
(2.5 KN)
Outer Armor:
564
(2.5 KN)
Cable Type Core Description Cable Weight
Temp Rating Plastic Type Insulation Thickness Copper Construction Res Typical Cap Typical O.D. Each In Air In H2O Spec. Gravity
°F
°C		 in
mm		 in
mm		 Ω/Kft
ΩKm		 pf/ft
pf/m		 in
mm		 lbs/Kft
Kg/Km
1N32PP-EEHS 300*°
-18°		 Poly 0.042
1.067		 19x0.0142
19x0.361		 2.8
9.2		 48
158		 0.155
3.937		 187
278		 155
230
1N32PTZ-EEHS 500*°
-18°		 ETFE 0.0175
0.445		 19x0.0142
19x0.361		 2.8
9.2		 46
151		 0.155
3.048		 194
288		 160
238
1N32PTZ-EEHS 500*°
-18°		 FEP 0.0245
0.622		 19x0.0142
19x0.361		 2.8
9.2		 46
151		 0.120
3.048		 194
288		 160
238

 * See attached specification sheet for recommended maximum temperature exposure times.

  • The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
  • Core assembly – Copper strand consists of a total of nineteen wires. Conductor resistance is measured at 68° F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The temperature rating assumes a normal gradient for both temperature and weight. All values shown are nominal or typical values.


View Product Specification Sheet