Home - Products - EMC - Products Info
Electromechanical Cable Product Info

9/32” (7.32 mm) Monoconductor 1N29-S75 Corrosion Resistant

9/32” (7.32 mm) Monoconductor 1N29-S75 Corrosion Resistant

Properties

Cable Diameter:

0.288” +0.005” - 0.002”
(7.32mm + 0.13mm -0.05mm)

Minimum Sheave Diameter:

16”
(41 cm)

Cable Stretch Coefficient:

1.88 ft/Kft/Klbs
(2.112 m/Km/5KN)

ELECTRICAL

Maximum Conductor Voltage:

1,500 VDC

Recommended Operating Conductor Voltage:

Conductor AWG Rating:

16

Recommended Operating Conductor Voltage

1,500 MegaΩ/Kft @ 1000VDC
(457 MegaΩ/Km @ 1000VDC)

Armor Electrical Resistance:

11.2 Ω/Kft
(36.8 Ω/Km)

Mechanical

Minimum Insulation Resistance:

Ends Fixed:

7,800 lbs
(34.7 KN) Nominal

Maximum Suggested Working Tension:

3,900 lbs
(17.35 KN)

Number and Size of Wires:

Inner Armor:
12 x 0.0400”
(1.016 mm)
Outer Armor:
18 x 0.0400”
(1.016 mm)

Average Wire Breaking Strength:

Inner Armor:
302 lbs
(1.34 KN)
Outer Armor:
302 lbs
(1.34 KN)
Cable Type Core Description Cable Weight
Temp Rating Plastic Type Insulation Thickness Copper Construction Res Typical Cap Typical O.D. Each In Air In H2O Spec. Gravity
°F
°C		 in
mm		 in
mm		 Ω/Kft
ΩKm		 pf/ft
pf/m		 in
mm		 lbs/Kft
Kg/Km
1N29WTZ–S75 500*°
-18°		 ETFE 0.019
0.483		 19x0.0128
19x0.325		 4.0
13.1		 54
157		 0.136
3.454		 161
239		 132
198
1N29WTZ–S75 500*°
-18°		 FEP 0.017
0.432		 19x0.0128
19x0.325		 4.0
13.1		 48
157		 0.098
2.489		 161
239		 132
198

* See attached specification sheet for recommended maximum temperature exposure times.

  • While insulation is rated to 1-hour exposure of 500°F, alloy armor wires may have reduced corrosion resistance at temperatures above 350°F.
  • The armor wires are made of corrosion resistant alloy steel suitable for low level H2S and CO2 environments.
  • Conductor has nickel plated wires adhering to ASTMB355 Class 10 for increased corrosion resistance.
  • Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68°F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The insulation temperature rating assumes a normal gradient for both temperature and weight.All values shown are nominal or typical values.


View Product Specification Sheet