Home - Products - EMC - Products Info
Electromechanical Cable Product Info

7/32” (5.69 mm) Monoconductor 1N22-S75 Corrosion Resistant

7/32” (5.69 mm) Monoconductor 1N22-S75 Corrosion Resistant

Properties

Cable Diameter:

0.224” +0.005” – 0.002”
(5.69mm + 0.13mm -0.05mm)

Minimum Sheave Diameter:

14”
(36 cm)

Cable Stretch Coefficient:

3.12 ft/Kft/Klbs
(3.51 m/Km/5KN)

ELECTRICAL

Maximum Conductor Voltage:

1,200 VDC

Recommended Operating Conductor Voltage:

Conductor AWG Rating:

18

Recommended Operating Conductor Voltage

1,500 MegaΩ/Kft @ 500VDC
(457 MegaΩ/Km @ 500VDC)

Armor Electrical Resistance:

18.1 Ω/Kft
(61 Ω/Km)

Mechanical

Minimum Insulation Resistance:

Ends Fixed:

4,700 lbs
(20.9 KN) Nominal

Maximum Suggested Working Tension:

2,350 lbs
(10.45 KN)

Number and Size of Wires:

Inner Armor:
12 x 0.0310”
(0.787 mm)
Outer Armor:
18 x 0.0310”
(0.787 mm)

Average Wire Breaking Strength:

Inner Armor:
181 lbs
(0.81 KN)
Outer Armor:
181 lbs
(0.81 KN)
Cable Type Core Description Cable Weight
Temp Rating Plastic Type Insulation Thickness Copper Construction Res Typical Cap Typical O.D. Each In Air In H2O Spec. Gravity
°F
°C		 in
mm		 in
mm		 Ω/Kft
ΩKm		 pf/ft
pf/m		 in
mm		 lbs/Kft
Kg/Km
1N22SA–S75 500*°
-18°		 PFA 0.0305
0.775		 7x0.0159
7x0.404		 6.7
22.0		 43
141		 0.108
2.743		 98
146		 81
120

* See attached specification sheet for recommended maximum temperature exposure times.

  • While insulation is rated to 1-hour exposure of 500°F, alloy armor wires may have reduced corrosion resistance at temperatures above 350°F. 
  • The armor wires are made of corrosion resistant alloy steel suitable for low level H2S and CO2 environments. 
  • Conductor has nickel plated wires adhering to ASTMB355 Class 10 for increased corrosion resistance.
  • Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68°F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The insulation temperature rating assumes a normal gradient for both temperature and weight.
  • All values shown are nominal or typical values.


View Product Specification Sheet 

This website uses cookies to ensure you get the best experience on our website. Learn more
OK SETTINGS