Home - Products - EMC - Products Info
Electromechanical Cable Product Info

7/32” (5.69 mm) Monoconductor 1N22

7/32” (5.69 mm) Monoconductor 1N22

Properties

Cable Diameter:

0.224” +0.005” - 0.002”
(5.69mm + 0.13mm -0.05mm)

Minimum Sheave Diameter:

14”
(36 cm)

Cable Stretch Coefficient:

2.5 ft/Kft/Klbs
(2.81 m/Km/5KN)

ELECTRICAL

Maximum Conductor Voltage:

1,200 VDC

Recommended Operating Conductor Voltage:

Conductor AWG Rating:

16

Recommended Operating Conductor Voltage

1,500 MegaΩ/Kft @ 1000VDC
(457 MegaΩ/Km @ 1000VDC)

Armor Electrical Resistance:

4.4 Ω/Kft
(14.4 Ω/Km)

Mechanical

Minimum Insulation Resistance:

Ends Fixed:

5,600 lbs
(24.9 KN) Nominal

Maximum Suggested Working Tension:

2,800 lbs
(12.5 KN)

Number and Size of Wires:

Inner Armor:
12 x 0.0310”
(0.787 mm)
Outer Armor:
18 x 0.0310”
(0.787 mm)

Average Wire Breaking Strength:

Inner Armor:
215 lbs
(0.96 KN)
Outer Armor:
215 lbs
(0.96 KN)
Cable Type Core Description Cable Weight
Temp Rating Plastic Type Insulation Thickness Copper Construction Res Typical Cap Typical O.D. Each In Air In H2O Spec. Gravity
°F
°C		 in
mm		 in
mm		 Ω/Kft
ΩKm		 pf/ft
pf/m		 in
mm		 lbs/Kft
Kg/Km
1N22PP 300*°
-18°		 Poly 0.0245
0.622		 19x0.0119
19x0.302		 4.1
13.5		 61
200		 0.108
2.743		 93
139		 77
115		 N/A
1N22PXZ 420*°
-18°		 ETFE 0.0115
0.292		 19x0.0119
19x0.302		 4.1
13.5		 61
200		 0.108
2.743		 94
140		 78
116		 N/A
1N22PXZ 420*°
-18°		 TPX 0.0130
0.330		 19x0.0119
19x0.302		 4.1
13.5		 61
200		 0.085
2.159		 94
140		 78
116		 N/A
1N22PTZ 500*°
-18°		 ETFE 0.0245
0.622		 19x0.0119
19x0.302		 4.1
13.5		 59
194		 0.108
2.743		 96
143		 90
134		 N/A
1N22PTZ 500*°
-18°		 FEP 0.0115
0.330		 19x0.0119
19x0.302		 4.1
13.5		 59
194		 0.085
2.159		 96
143		 90
134		 N/A

* See attached specification sheet for recommended maximum temperature exposure times.

  • The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
  • The nickel coated copper wires are made of ASTM B355 Class 10 and they are used to increase corrosion protection.
  • Core assembly – Copper strand consists of a total of nineteen wires. Conductor resistance is measured at 68° F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The temperature rating assumes a normal gradient for both temperature and weight.
  • All values shown are nominal or typical values.


View Product Specification Sheet