Electromechanical Cable Product Info

7/32 (5.69mm) 1N22-GeoSteam

Properties

Cable Diameter:

0.224” +0.005” - 0.002”

(5.69mm +0.13mm -0.05mm)

Minimum Sheave Diameter:

14”

(36 cm)

Cable Stretch Coefficient:

2.5 ft/Kft/Klbs

(2.81 m/Km/5KN)

ELECTRICAL

Maximum Conductor Voltage:

1,200

Recommended Operating Conductor Voltage:

Conductor AWG Rating:

Recommended Operating Conductor Voltage

1,500 MegaΩ/Kft @ 500 VDC

(457 MegaΩ/Km @ 500VDC)

Armor Electrical Resistance:

4.4 Ω/Kft

(14.4 Ω/Km)

Mechanical

Minimum Insulation Resistance:

Ends Fixed:

5,600 lbs

(24.9 KN) Nominal

Maximum Suggested Working Tension:

2,800 lbs

(12.45 KN)

Number and Size of Wires:

Inner Armor:

12 x 0.0310”

(0.787 mm)

Outer Armor:

18 x 0.0310”

(0.787 mm)

Average Wire Breaking Strength:

Inner Armor:

215 lbs

(0.96 KN)

Outer Armor:

215 lbs

(0.96 KN)

Cable Type	Core Description							Cable Weight
	Temp Rating	Plastic Type	Insulation Thickness	Copper Construction	Res Typical	Cap Typical	O.D. Each	In Air	In H2O	Spec. Gravity
	°F °C		in mm	in mm	Ω/Kft ΩKm	pf/ft pf/m	in mm	lbs/Kft Kg/Km
1N22WG	600*° -18°	ECA	0.0245 0.662	19x0.0119 19x0.302	4.7 15.4	55 190	0.108 2.743	97 144	80 119

* See attached specification sheet for recommended maximum temperature exposure times.

The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.

Conductor has nickel plated wires adhering to ASTMB355 Class 10 for increased corrosion resistance.
Core assembly – Copper strand consists of a total of nineteen wires. Conductor resistance is measured at 68° F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
SUPERSEAL, a special pressure seal agent, is applied between armor layers.
The temperature rating assumes a normal gradient for both temperature and weight.
All values shown are nominal or typical values.

View Product Specification Sheet