Home - Products - EMC - Products Info
Electromechanical Cable Product Info

1/10” (2.57 mm) Monoconductor 1N10

1/10” (2.57 mm) Monoconductor 1N10

Properties

Cable Diameter:

0.101” +0.004” -0.002”
(2.57mm + 0.10mm -0.05mm)

Minimum Sheave Diameter:

6”
(15 cm)

Cable Stretch Coefficient:

13.1 ft/Kft/Klbs
(14.72 m/Km/5KN)

ELECTRICAL

Maximum Conductor Voltage:

300 VDC

Recommended Operating Conductor Voltage:

Conductor AWG Rating:

24

Recommended Operating Conductor Voltage

1,500 MegaΩ/Kft @ 1000VDC
(457 MegaΩ/Km @ 1000VDC)

Armor Electrical Resistance:

22.0 Ω/Kft
(72.2 Ω/Km)

Mechanical

Minimum Insulation Resistance:

Ends Fixed:

1,000 lbs
(4.5 KN Nominal)

Maximum Suggested Working Tension:

500 lbs
(2.2 KN)

Number and Size of Wires:

Inner Armor:
12 x 0.0140”
(0.356 mm)
Outer Armor:
18 x 0.0140”
(0.356 mm)

Average Wire Breaking Strength:

Inner Armor:
42 lbs
(0.19 KN)
Outer Armor:
42 lbs
(0.19 KN)
Cable Type Core Description Cable Weight
Temp Rating Plastic Type Insulation Thickness Copper Construction Res Typical Cap Typical O.D. Each In Air In H2O Spec. Gravity
°F
°C		 in
mm		 in
mm		 Ω/Kft
ΩKm		 pf/ft
pf/m		 in
mm		 lbs/Kft
Kg/Km
1N10RP 300°
149°		 Poly 0.012
0.305		 7x0.0085
7x0.216		 21.0
69.0		 51
167		 0.049
1.244		 19
28		 15
23		 0

* See attached specification sheet for recommended maximum temperature exposure times. 

  • The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEI PS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
  • Core assembly – Copper strand consists of six wires around one center wire. Conductor resistance is measured at 68° F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The temperature rating assumes a normal gradient for both temperature and weight.
  • All values shown are nominal or typical values. 
  • Not for use in oil and gas wells. 


View Product Specification Sheet