Home - Products - EMC - Products Info
Electromechanical Cable Product Info

7/32” (5.69 mm) Monoconductor 1K22

7/32” (5.69 mm) Monoconductor 1K22

Properties

Cable Diameter:

0.224” +0.005” - 0.002”
(5.69mm +0.13mm -0.05mm)

Minimum Sheave Diameter:

14”
(36cm)

Cable Stretch Coefficient:

2.2 ft/kft/Klbs
(2.5 m/Km/5KN)

ELECTRICAL

Maximum Conductor Voltage:

1,200 VDC

Recommended Operating Conductor Voltage:

Conductor AWG Rating:

16

Recommended Operating Conductor Voltage

1,500 MegaΩ/Kft @ 1000VDC
(457 Mega Ω/Km @ 1000VDC)

Armor Electrical Resistance:

4.3 Ω/Kft
(14.1 Ω/Km)

Mechanical

Minimum Insulation Resistance:

Ends Fixed:

5,600 lbs
(24.9 KN) Nominal

Maximum Suggested Working Tension:

2,800 lbs
(12.5 KN)

Number and Size of Wires:

Inner Armor:
15 x 0.0243”
(0.617 mm)
Outer Armor:
15 x 0.0358”
(0.909 mm)

Average Wire Breaking Strength:

Inner Armor:
132 lbs
(0.59 KN)
Outer Armor:
286 lbs
(1.27 KN)
Cable Type Core Description Cable Weight
Temp Rating Plastic Type Insulation Thickness Copper Construction Res Typical Cap Typical O.D. Each In Air In H2O Spec. Gravity
°F
°C		 in
mm		 in
mm		 Ω/Kft
ΩKm		 pf/ft
pf/m		 in
mm		 lbs/Kft
Kg/Km
1K22PP 300*°
-18°		 Poly 0.0245
0.622		 19x0.0119
19x0.302		 4.1
13.5		 60
197		 0.108
2.743		 91
136		 75
112
1K22PXZ 420*°
-18°		 TPX 0.0130
0.330		 19x0.0119
19x0.302		 41
13.5		 61
200		 0.085
2.159		 92
137		 76
114
1K22PXZ 420*°
-18°		 ETFE 0.0115
0.292		 19x0.0119
19x0.302		 4.1
13.5		 61
200		 0.108
2.743		 92
137		 76
114
1K22PTZ 500*°
-18°		 FEP 0.0130
0.330		 19x0.0119
19x0.302		 4.1
13.5		 58
190		 0.085
2.159		 95
140		 78
116
1K22PTZ 500*°
-18°		 ETFE 0.0115
0.292		 19x0.0119
19x0.302		 4.1
13.5		 58
190		 0.108
2.743		 95
140		 78
116
  • The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for protection during shipping and storing. Wires are preformed.
  • Core assembly – Copper strand consists of a total of nineteen wires. Conductor resistance is measured at 68° F. Voids in the copper strand are filled with a water-blocking agent to reduce water and gas migration.
  • SUPERSEAL, a special pressure seal agent, is applied between armor layers.
  • The temperature rating assumes a normal gradient for both temperature and weight.
  • All values shown are nominal or typical values.


View Product Specification Sheet

This website uses cookies to ensure you get the best experience on our website. Learn more
OK SETTINGS